Miele PDR 908 EL, Инструкции по эксплуатации и монтажу

Страница: 94 / 96

Supervisor level
94
Debounce time
In coin mode, the debounce time for
the minimum payment signal that
must be applied can be adjusted.
– Factory default: Short
For payment systems where the
falling coin generates the paid pulse.
– Long
For central control units on a 230 V
basis.
Pay system override time
Setting the transition signal for the
payment system. Security time margin
to prevent the payment system being
tampered with.
The override time can be set or
switched off in increments of one
minute from 30 minutes up to 4 hours.
If the programme does not end within
the transition period, the setting in the
payment system is reset. The
programme is cancelled.
Factory setting: 3 hours
Duration Cool air
The programme running time can be
adjusted.
A time of between 10 minutes and
2 hours can be set in five-minute
intervals.
Factory setting: 2 hours
Duration Warm air
The programme running time can be
adjusted.
A time of between 20 minutes and
2 hours can be set in five-minute
intervals.
Factory setting: 2 hours
FOC programmes
In coin mode, you can decide whether
the
Timed drying cool air programme
can be used for free.
– Factory setting: Off
– On