Miele PDR 908 EL, Инструкции по эксплуатации и монтажу

Страница: 85 / 96

Supervisor level
85
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
– Factory setting: Off
– On
Cooling down temperature
The laundry will be cooled down
automatically before the end of the
programme. The automatic cooling-
down phase which takes place before
the end of a programme can be set at
a cooler level for all programmes. This
means that the cooling phase is
extended.
Changing this setting leads to increased
energy consumption.
The setting can be changed from 40°C–
55°C.
Factory setting: 55°C
Service
Clean out the airways
The tumble dryer's electronics
calculate the degree at which fluff or
detergent residue in the fluff filters and
air ducts are impairing performance. A
message to check them appears. You
can decide at what level of fluff this
reminder should be displayed.
This prompt, which you can configure,
is displayed:
Clean out the airways
– Off
The reminder does not appear.
However, if there is a very severe
blockage in the ducting, the
programme will be cancelled and the
reminder will appear in the display
regardless of this option.
– Heavy
The reminder only appears when
there is a heavy build-up of fluff.
– Factory setting: Normal
– Sensitive
The reminder appears when there is
only a small build-up of fluff.