Miele PDR 507 EL Marine, Инструкции по эксплуатации и монтажу

Страница: 63 / 80

Installation of the ducting
*INSTALLATION*
63
Sample calculation
A Wall pipe, with inserted grille
= 1 x 3.8 m relative pipe length = 3.8 m
B/D 2 bends, 90° plastic waste wa-
ter pipe
= 2 x 0.8 m relative pipe length
= 1.6 m
C 0.5 m plastic waste water pipe
= 0.5 x 1 m relative pipe length = 0.5 m
Total duct length = 5.9 m
Because the total duct length is less
than 20 m (according to table II), a pipe
diameter of 100 mm will be sufficient.
Exhaust air outlets on the back
of the tumble dryer
Sealing the air outlets
The ducting is installed on the right- or
left-hand side of the tumble dryer's
back panel. You must seal the unused
connection with a cap.

Turn the cap to the left to remove it.
 Press the cap firmly into the open air
outlet.
Dimensions of the exhaust air outlets
100
92
100
100
92
All measurements in mm