manualshive.com logo in svg

Miele PDR 300 HP SmartBiz, Инструкции по эксплуатации и монтажу, Страница: 27 / 76

Поделиться
Скачать
Miele PDR 300 HP SmartBiz Скачать руководство пользователя страница 27

4. Starting the programme

27

Starting the programme

Touch the flashing 

Start/Stop

 sensor

control.

The 

Start/Stop

 sensor control lights up.

Programme sequence

– If Delay start has been selected, the

Delay start time will start to count
down first.

– With a longer Delay start time, the

drum will rotate occasionally to un-
tangle the laundry. This will loosen
the laundry.

– The programme starts.

– The 

Perfect Dry

 indicator will only

flash/light up with programmes with
selectable drying levels (see also
“Operating the tumble dryer”).

– The tumble dryer measures the resid-

ual moisture of the laundry and cal-
culates the required programme dur-
ation.
If a small load or dry laundry is
placed in the tumble dryer, it is dried/
aired for a preset duration. In this
case, the 

Perfect Dry

 indicator does

not light up at the end of the pro-
gramme.

Laundry items and fabrics can wear
out unnecessarily.
Avoid overdrying the laundry.

Energy savings

After 10 minutes, the indicators dim.
The 

Start/Stop

 sensor control flashes

slowly.

Touch the 

Start/Stop

 sensor control

to switch the indicators on again (this
does not have any effect on a running
programme).

– Before the programme finishes, the

laundry is cooled.

Содержание PDR 300 HP SmartBiz













































































Отзывы:

Нет отзывов