Automatic Programs
45
With the wide range of automatic
programs, you can achieve excellent
results with ease.
The automatic programs are weight-
dependent. The
setting allows you
to set the unit of weight to either
pounds (lb) or grams (g) (see
“Settings”).
If you select pounds (lb) as the unit of
weight, the weight of the food will be
shown on the display in the format
“lb:oz” (e.g.,
:
for 1 lb 2 oz).
Using automatic programs
Select the
sensor control.
The
symbol and
will appear on
the display.
Use the
and
arrow keys to
select the required automatic
program (see “Overview of automatic
programs”).
Confirm with
OK
.
The display will show the lowest food
weight supported by the automatic
program.
The
start symbol will flash together
with either lb or g.
Use the
and
arrow keys to set
the weight.
Select the
sensor control.
The cooking process starts. The
cooking duration depends on which
automatic program is selected and the
weight that is set.
About halfway through the cooking
duration, an audible signal will sound to
remind you to turn or stir the food.
Open the door to interrupt the
cooking process.
Turn or stir the food.
Close the door and select
the
sensor control.
The cooking process will resume.
To increase the cooking duration of
the automatic program in increments,
press the
sensor control
repeatedly until the required time
appears on the display.
At the end of the cooking duration, an
audible signal will sound.
At the end of the cooking process,
allow the food to stand at room
temperature for approx. 2 minutes.
This standing time allows the heat to
spread more evenly throughout the
food.
