manualshive.com logo in svg

Miele KWT 6722 iG S, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KWT 6722 iG S Скачать руководство пользователя страница 66

Installation

-

I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-

66

Changing the door hinging

The wine conditioning unit is supplied
right-hinged. If left-hand hinging is re-
quired, the hinges must be changed.

To change the door hinging, you will
need the following tools:

Danger of injury and damage to

the appliance.
The glass door is breakable.
The glass door is heavy (approx.
33 kg). Always change the door
hinging with the assistance of an-
other person.

Risk of damage.

The wine conditioning unit has an
elongated glass door and must not
be set down vertically at any time.

Danger of injury and damage to

the appliance.
The glass door can drop.
When changing the door hinging
make sure that all fixing parts are se-
curely screwed into position.

Tip: 

Place a suitable cover on the floor

in front of the appliance to protect the
appliance door and your floor from
damage.

Be careful not to damage the door
seal. If the door seal is damaged, the
appliance door may not close prop-
erly and cooling will be insufficient.

Open the appliance door and remove
covers 

 and 

 on the left and right

of the wine conditioning unit.

Remove cover 

 from the bottom of

the wine conditioning unit.

Unscrew the transport safety
device 

.

Tip: 

Keep this device in a safe place for

refitting should the appliance need to
be moved in the future.

Содержание KWT 6722 iG S





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды