Miele KWNS 28462 E ed/cs Скачать руководство пользователя | Manualshive

Страница: 61 / 120

background image

Cleaning and care

61



Risk of damage as a result of ex-

cessively high dishwasher temperat-
ures.
Parts of the refrigeration appliance
may become unusable, e.g. deform,
if they are washed in the dishwasher
at more than 55 °C.
For dishwasher-safe parts, only use
dishwasher programmes with a max-
imum temperature of 55 °C.

Contact with natural dyes from car-
rots, tomatoes and ketchup, etc., may
discolour the plastic parts in the dish-
washer. This discolouration does not
affect the stability of the parts.

The following parts

can be cleaned in

the dishwasher

:

– the glass plates (without trim)



The wooden shelves in the wine con-
ditioning zones are fitted on tele-
scopic runners. Wipe the telescopic
runners with a damp cloth to clean
them.



Be careful not to wash out the

special lubricant in the telescopic
runners during cleaning.



Leave the door open to air the appli-
ance for a short while and to prevent
odours building up.

Cleaning the front of the appli-
ance and the side panels

If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer discol-
ouration or damage.
Therefore, it is best to remove soiling
from the appliance front and side
panels immediately.

All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or discol-
our the surfaces.
See the information on “Cleaning
agents” at the beginning of this sec-
tion.



Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.



After cleaning, wipe with clean water
and dry with a soft cloth.

Appliance front



Risk of damage as a result of in-

correct cleaning.
The front finish (CleanSteel) will be
damaged.

Do not use a stainless steel clean-
ing agent

on this surface.

The appliance front has a high quality,
special finish (CleanSteel). It is resistant
to soiling and is very easy to clean.



Clean the appliance door with a pro-
prietary glass cleaner.

«
...
59
60
61
62
63
...
»

Содержание KWNS 28462 E ed/cs

























































































































Отзывы:

Нет отзывов

Похожие инструкции для KWNS 28462 E ed/cs

Бренд: Earlex Страницы: 4

Бренд: Vacmaster Страницы: 14

Бренд: Vacmaster Страницы: 8

Бренд: Narita Страницы: 8

Бренд: T-Fal Страницы: 98

Бренд: Newlux Страницы: 78

Toledo XT 110 Ceramic

Бренд: Rangemaster Страницы: 36

Бренд: Lakeland Страницы: 36

Бренд: Kalorik Страницы: 24

Бренд: Metos Страницы: 42

Бренд: Petra Страницы: 20

Бренд: U-Line Страницы: 52

Kegorator IBK49BK

Бренд: Igloo Страницы: 58

Бренд: U-Line Страницы: 65

COURANT CSD-2176

Бренд: Impecca Страницы: 33

Бренд: Omcan Страницы: 20

Бренд: Omcan Страницы: 16

Omk.FPZ01.E11.0401.Z5F

Бренд: omake Страницы: 49

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды