Miele KS 28463 D ed/cs Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 88

background image

Warning and Safety instructions

5

This appliance complies with all statutory safety requirements.
Please note that inappropriate use can lead to personal injury and
damage to property.

To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on installation, safety, use and
maintenance.

Miele cannot be held liable for non-compliance with these
instructions.

Keep these instructions in a safe place and ensure that new users
are familiar with the contents. Pass them on to any future owner.

Correct application



This appliance is designed for domestic use and for use in similar

environments by guests in hotel or motel rooms, bed & breakfasts
and other typical living quarters. This does not include common/
shared facilities or commercial facilities within hotels, motels or bed
& breakfasts.



This appliance is intended for domestic use only for the cool

storage of food and drinks.
Any other usage is not permitted.



This appliance is not suitable for storing and keeping cool

medicines, blood plasma, laboratory preparations or other such
materials or products. Incorrect use of the appliance for such
purposes can cause deterioration of the items stored. The appliance
is not suitable for use in areas where there is a risk of explosion.
Miele cannot be held liable for damage resulting from improper or
incorrect use of the appliance.

«
...
3
4
5
6
7
...
»

Содержание KS 28463 D ed/cs

























































































Отзывы:

Нет отзывов

Похожие инструкции для KS 28463 D ed/cs

Бренд: Zanussi Страницы: 16

Бренд: Bauknecht Страницы: 9

Бренд: Klarstein Страницы: 36

Бренд: Jacky's Страницы: 56

Бренд: Smeg Страницы: 14

Бренд: NEFF Страницы: 28

Бренд: Qilive Страницы: 180

8.436.545.201.497

Бренд: Svan Страницы: 68

Бренд: Heinner Страницы: 30

Бренд: Orava Страницы: 68

Бренд: Tricity Bendix Страницы: 16

Бренд: Zanussi Electrolux Страницы: 20

Бренд: Nero Страницы: 2

Бренд: Silver King Страницы: 8

Бренд: Dacor Страницы: 252

Бренд: Hotpoint Страницы: 4

Бренд: Frigidaire Страницы: 4

Бренд: Frigidaire Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды