Miele KS 28463 D ed/cs, Инструкции по эксплуатации и монтажу

Страница: 43 / 88

Adjusting the interior fittings
43
Adjusting the door shelves/
bottle shelf
Only move door/bottle shelves when
they are empty.

Push the door/bottle shelf upwards,
then remove it by pulling it forwards.

Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Moving an adjustable shelf/
adjustable shelf with lighting
By adjusting the position of an
adjustable shelf with lighting in the
refrigerator, you can change the
illumination in this section according to
your needs.
Stoppers prevent the shelves from
being dislodged by mistake.
 The shelves can be adjusted
according to the height of the food.
1. Lift the shelf up slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
 Push the shelf in until it clicks into
position.
The raised edge on the protective strip
at the back must face upward to
prevent food from touching the back
wall of the appliance and freezing to it.
Adjusting the bottle rack
The bottle rack can be placed on
different levels in the appliance.
 Raise the rack and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The rear stopping bar must face
upwards to prevent the bottles touching
the rear wall.
The bottle rack has stoppers at the
sides to prevent the rack being pulled
out unintentionally.