Miele KMR 1124 G, Инструкции по эксплуатации и монтажу

Страница: 44 / 68

Dimensional drawings
44
All rangetops KMR 113x / KMR 135x with Standard Burner Con-
figuration (M Pro Power Plus)
If a BTU-reducing kit is necessary, an authorized installer is required to modify
the product to meet ANSI Z21.

In case of combustible construction, an additional minimum clearance of
6" (150 mm) on each side is necessary. Ensure local codes are observed.
Position Dimensions Description

13" (330 mm) Maximum depth of top cabinet
 18" (457 mm) Minimum distance to bottom edge of
top cabinet

7¹/₂" (190.5 mm) Distance between the top edge of the
countertop and the top edge of the
support base

10" (254 mm) Minimum distance to combustible sur-
faces

Support base
1)
1) The support base must have a minimum thickness of ³/₄" (19.05 mm).
At the rear right of the support base, a cut-out of 5 1/8" x 7 1/8" (130 mm x 80 mm) (gas
connection) is provided, and, at the rear left, a cut-out of 4 6/8" x 1 9/16" (120 mm x 40
mm) (electrical connection).