manualshive.com logo in svg

Miele KMDA 7633 FL, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KMDA 7633 FL Скачать руководство пользователя страница 42

Operation

42

Extractor

The extractor will switch itself on
automatically if a there is a pan on a
cooking zone and a power level has
been set for that zone (Con@ctivity).
The power level on the extractor is set
to suit to the power level on the hob.

You can deactivate Con@ctivity
temporarily.

The power level of the extractor can be
manually altered at any time. For light to
heavy cooking vapours, select from
power levels 

1

 to 

3

. For short periods of

strong vapours and cooking odours,
e.g. whilst searing meat, select the 

B

Booster setting.

Tip: 

To help release vapours effectively

with pans over 15 cm high, place a
wooden spoon between the lid and the
pan.

Power level setting / Switching off

To switch the fan on touch the
appropriate sensor for the power
level you want.

To switch the fan off touch the 

0

sensor.

If the extractor is not switched off, it
will switch itself off 12 hours after the
last automatic operation.

Deactivating Con@ctivity

The extractor has switched on
automatically.

Touch the 

0

 control to deactivate

Con@ctivity.

Set the power level you want.

Con@ctivity is activated again when
you switch the hob off and back on
again.

Booster

The maximum duration for the Booster
is 10 minutes.

To switch it off early, set a different
power level.

Содержание KMDA 7633 FL





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды