manualshive.com logo in svg

Miele KM 7629 FX, Инструкции по эксплуатации и монтажу, Страница: 56 / 92

Поделиться
Скачать
Miele KM 7629 FX Скачать руководство пользователя страница 56

Programming

56

You can adapt the programming of the
hob to your personal needs. Several
settings can be altered in succession.

After accessing programming mode,
the 

 symbol appears and 



 will

appear in the timer display. After a few
seconds 

:

 (Programme 01) will flash

alternately with 

:

 (Code) in the timer

display.

Change programming

Accessing programming mode

The 

 sensor is located approx.

1 cm (index finger width) to the left of
the 

 sensor.

With the hob switched off

, touch

the 

 and 

 sensors at the same

time until the 

 symbol and 



appear in the timer display.

Setting a programme

For a two digit programme number
you need to first set the tens position.

Whilst the programme is visible in the
display (e.g. 

:

), touch

the 

 sensor repeatedly until the

number for the programme you want
appears in the display or touch the
appropriate number on the numerical
keybank.

Setting the code

Whilst the code is visible in the
display (e.g. 

:

), touch

the 

 sensor repeatedly until the

number for the code you want
appears in the display or touch the
appropriate number on the numerical
keybank.

To save the settings

While the programme is showing in
the display (e. g. 

:

) touch the 

sensor until the indicators go out.

To avoid saving the settings

While the code is showing in the
display (e. g. 

:

) touch the 

sensor until the indicators go out.

Содержание KM 7629 FX





























































































Отзывы:

Нет отзывов