Problem
Possible cause
Remedy
After the hob is
switched on "
LC
"
appears in the timer
display for a few
seconds.
The system lock is
activated.
Deactivate the system
lock (see "Safety lock /
System lock").
After the hob is
switched on "
dE
"
appears in the timer
display for a few
seconds.
The cooking zones do
not heat up.
The appliance is in
demonstration mode.
Deactivate demonstration
mode (see
"Programming").
The hob switches off
while it is use.
One of the cooking zones
has probably been on for
too long.
You can use the cooking
zone again by switching it
back on (see "Safety
switch-off").
The heating element for
one of the cooking
zones switches on and
off.
Power levels 1 to 8: This
is not a fault.
This is quite normal, and
due to the electronic
regulation of the
temperature (see "How
the cooking zones work").
Power level 9:
The overheating
protection mechanism
has triggered.
To prevent the ceramic
glass from overheating,
the overheating
protection mechanism
automatically switches
the cooking zone off.
When the ceramic glass
has cooled down, the
heating element switches
back on again (see
"Overheating").
Problem solving guide
57
Содержание KM 6220
Страница 10: ...Control panels Description of the appliance 10 ...
Страница 71: ...71 ...
Страница 72: ...Alteration rights reserved 3311 M Nr 09 140 340 00 ...