Miele KM 3010 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 60

background image

Installation

*
I
N
S
T
A
L
L
A
T
I
O
N
*

48

Gas connection

For any gas work in the UK always
use a Gas Safe registered engineer.



Risk of explosion due to an in-

correct gas connection.
If the gas connection is carried out
incorrectly, it may result in gas leak-
age.
Connection to the gas supply must
only be undertaken by an approved
and registered gas installer (GasSafe
in the UK) in strict accordance with
current local and national safety and
building regulations. The installer is
responsible for ensuring that the ap-
pliance functions correctly when in-
stalled.



Risk of explosion due to an in-

correct conversion.
If the conversion to another type of
gas is carried out incorrectly, it may
result in gas leakage.
Conversion from one type of gas to
another must only be undertaken by
an approved and registered gas in-
staller in strict accordance with cur-
rent local and national safety and
building regulations (GasSafe in the
UK). The installer is responsible for
ensuring that the appliance functions
correctly when installed.

The gas connection must be in-
stalled so that connection can be
made either from inside or outside
the kitchen furniture unit. The isolat-
ing valve must be easily accessible
and visible (by opening the cabinet
door if necessary).

Check with your local gas supplier
about the type of gas supplied and
compare this information with the
type of gas quoted on the appli-
ance's data plate.

The hob is not connected to an ex-
haust flue.
When installing and connecting the
appliance please observe all relevant
installation instructions and ensure it
has adequate ventilation once in-
stalled.

The gas connection must be made in
accordance with national and local
regulations (GasSafe in the UK).

Any special local conditions relating
to gas installations as well as build-
ing regulations must also be ob-
served.

«
...
46
47
48
49
50
...
»

Содержание KM 3010





























































Отзывы:

Нет отзывов

Похожие инструкции для KM 3010

Бренд: Gastro-Cool Страницы: 21

Бренд: Harbor Freight Tools Страницы: 5

Бренд: Esse Страницы: 16

Бренд: Unold Страницы: 72

Бренд: Parkinson Cowan Страницы: 44

Classica C92IPBL9-1

Бренд: Smeg Страницы: 56

Бренд: Fisher & Paykel Страницы: 60

Бренд: Gaggenau Страницы: 12

Бренд: GE Страницы: 2

Бренд: inventum Страницы: 40

Kenmore Refrigerator

Бренд: Sears Страницы: 12

Бренд: Rangemaster Страницы: 36

Classic Deluxe 90 Induction

Бренд: Rangemaster Страницы: 40

110 DUAL FUEL U109600-02

Бренд: Rangemaster Страницы: 40

Excel 110 Ceramic

Бренд: Rangemaster Страницы: 44

Бренд: Midea Страницы: 18

Бренд: IKEA Страницы: 20

Бренд: IKEA Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды