background image

The correct temperature

22

It is very important to set the correct
temperature for storing food in the ap-
pliance. Bacteria will cause food which
is not stored at the correct temperature
to deteriorate rapidly. Temperature influ-
ences the growth rate of these bacteria.
Reducing the temperature reduces their
growth rate.

The temperature in the appliance will
rise:

– the more often the appliance door is

opened and the longer it is kept open

– the more food that is stored in it

– the warmer the food is that is being

put into it

– the higher the ambient temperature

surrounding the refrigeration appli-
ance is. The appliance is designed
for use within specific ambient tem-
peratures (climate range). Do not use
in ambient temperatures for which it
is not designed

... in the refrigerator section

We recommend a temperature of 

39°F

(4°C)

 in the refrigerator section.

Automatic cold air circulation (Dyna-
Cool)

The fan automatically turns on when the
cooling system for the refrigerator sec-
tion turns on. It distributes the tempera-
ture in the refrigerator section to all ar-
eas evenly so that all the food inside will
be chilled to about the same degree.

... in the Freezer Zone

To freeze fresh food and to store frozen
food for a long time, a temperature of

0°F (-18°C)

 is required. At this tempera-

ture the growth of bacteria is generally
halted. As soon as the temperature
rises above 14°F (-10°C), the bacteria
become active in the food again so it
cannot be kept as long. For this reason,
partially defrosted or defrosted food
must not be re-frozen. Food may be re-
frozen once it has been cooked (boiled
or roasted), as the high temperatures
achieved when cooking destroy most
bacteria.

Содержание KFN 37232 iD





















































































Отзывы: