Miele KFN 29493 DE edt/cs страница 56 Скачать руководство пользователя

Страница: 56 / 116

Adjusting the interior fittings (refrigerator section)

Moving and fitting the bottle
holder

The bottle holder can be moved left or
right to create more room for drink car-
tons.

The bottle holder can be removed com-
pletely (e.g. for cleaning):



Pull the bottle holder upwards to re-
move it from the rear edge of the
bottle shelf.

The bottle holder can be replaced after
cleaning.

Moving the charcoal filters

When storing very strong smelling
food (e.g. very ripe cheese):

- Place the holder with the charcoal fil-

ters on the shelf where this food is
kept.

- Change the filters sooner if neces-

sary.

- Use more charcoal filters (with hold-

ers) in the appliance (see “Accessor-
ies - Optional accessories”).

The holder for the charcoal filters sits
on the protective strip at the back of the
shelf.



Pull the charcoal filter holder upwards
to remove it from the protective strip.



Refit it on the protective strip of the
shelf you wish to use it on.

Содержание KFN 29493 DE edt/cs





















































































































Результаты поиска

Содержание KFN 29493 DE edt/cs

Отзывы:

Похожие инструкции для KFN 29493 DE edt/cs

Бренды по названию

Популярные бренды

Miele KFN 29493 DE edt/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 29493 DE edt/cs

Отзывы:

Похожие инструкции для KFN 29493 DE edt/cs

Бренды по названию

Популярные бренды