Miele KFN 15842 D ed/cs Скачать руководство пользователя | Manualshive

Страница: 23 / 88

background image

Switching on and off

23

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.

Switching the appliance on

The refrigeration and freezer sections
can be switched on together with the
two On/Off sensors.

To enable the temperature to get
sufficiently cold inside the refrigerator,
allow it to run for approx. 3–5 hours
(depending on the ambient
temperature) before placing food in it.
Do not place food in the freezer
section until the temperature is at least
-18 °C.



Touch one of the two



On/Off

sensors until the temperature display
lights up.

The appliance is switched on and the
interior lighting will come on when the
fridge door is opened.

The temperature display for the
refrigerator section shows the current
temperature in the refrigerator section.

– If the temperature in the freezer

section is above 0 °C, bars will flash
in the temperature display for the
freezer section.

– As soon as the temperature drops

below 0 °C, the current temperature
in the freezer section will flash in the
display.

– The



display LEDs will flash until

the set temperature has been
reached in the freezer section.

The appliance will gradually reach the
pre-set temperatures:

– Temperature in the refrigerator

section = 3 °C

– Temperature in the freezer section =

-18 °C

«
...
21
22
23
24
25
...
»

Содержание KFN 15842 D ed/cs

























































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 15842 D ed/cs

10? Single Door Manual Defrost

Бренд: GE Страницы: 16

Бренд: GE Страницы: 132

Бренд: GE Страницы: 2

Бренд: Unique Страницы: 43

Бренд: U-Line Страницы: 18

Silhouette DFF1044BLS

Бренд: Danby Страницы: 20

Бренд: Samsung Страницы: 14

Бренд: Master Bilt Страницы: 2

Бренд: GVA Страницы: 16

Бренд: Jacky's Страницы: 40

Бренд: Xo Страницы: 24

Бренд: Laurus Страницы: 128

ACTIVESMART RF203Q

Бренд: Fisher & Paykel Страницы: 44

Бренд: Sears Страницы: 16

Бренд: Qilive Страницы: 128

Бренд: Philco Страницы: 156

Бренд: Westinghouse Страницы: 11

Бренд: BOMANN Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды