manualshive.com logo in svg

Miele KFN 13923 DE, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 13923 DE Скачать руководство пользователя страница 75

Installation

75

Prepare the refrigerator for installation
as close as possible to its intended
installation location.

Release the power cord from the
back of the appliance.

Remove any cord clips from the back
of the appliance.

Connect the refrigerator to the house-
hold water supply as described in the
section on “Water connection”.

Connect the refrigerator to the power
supply as described in the section on
“Electrical connection”.

Move the refrigerator carefully to its
intended installation location.

Position the refrigerator with the back
right against the anti-tip device.

Aligning the machine

SW19/10

To align the machine, adjust the front
feet using the wrench supplied, en-
suring it is stable and level.

3

/

16

" (5)

If necessary, also align the appliance's
rear feet using the two front adjusting
devices 

 (located next to the front

feet).

Using a socket wrench, turn the ad-
justing device 

 clockwise to raise

the appliance up at the back.

Leveling the machine door

Ensure

 that you unscrew the ad-

justable foot 

 from the lower hinge

plate until it sits on the floor. Then,
unscrew the foot by an additional
¼ turn.

Содержание KFN 13923 DE

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды