manualshive.com logo in svg

Miele KFN 13923 DE, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KFN 13923 DE Скачать руководство пользователя страница 73

Installation

73

Climate class

The appliance is designed for use within
a certain climate range (ambient tem-
peratures) and should not be used out-
side this range. The climate range of the
appliance is stated on the data plate in-
side the appliance.

Climate

class

Room temperature

SN

50°F to 90°F / 10°C to 32°C

N

60°F to 90°F / 16°C to 32°C

ST

60°F to 100°F / 16°C to

38°C

T

60°F to 109°F / 16°C to

43°C

Operating in a room which is too cold
will cause the compressor to turn off for
too long, causing the internal tempera-
ture in the appliance to rise, resulting in
damage.

Ventilation

WARNING! Fire hazard!

Operation of the machine is limited.
Keep the ventilation grille free from
obstruction.

Air at the back wall of the machine gets
warm.

Do not cover or obstruct the air

grille to allow for effective venting. It
must also be cleaned on a regular
basis to remove dust.

Installing the appliance

Two people are required to install

the appliance.

The appliance must be empty

when it is installed.

Move the appliance carefully on

floors that are sensitive to scratching
to prevent damage.

For easier installation, there are trans-
port handles on the back at the top of
the appliance and transport wheels
underneath.

Wall gap

The declared energy consumption will
be achieved if a wall gap of at least
2" (51 mm) is maintained between the
back of the appliance and the wall. 
A smaller wall gap will not affect the
functionality of the appliance, but it
will increase energy consumption
slightly.

Содержание KFN 13923 DE

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды