Miele KFN 13923 DE Скачать руководство пользователя | Manualshive

Страница: 70 / 96

background image

Electrical connection

*INSTALLATION*

70



Danger of electric shock!

The appliance must only be switched
on when it has been installed in ac-
cordance with the installation in-
structions.
Ground the appliance.
The appliance must not be grounded
via a gas pipe.
If in doubt, have a suitably qualified
and experienced electrician check
that the installation complies with rel-
evant regulations.
Do not install a fuse into neutral cur-
rent or grounding electrical circuit.
Do not use extension cords or un-
grounded (two prong) adapters.
Do not use a frayed or damaged
power cord.



Danger of electric shock!

For protection against electric shock
this appliance is equipped with a
pole-free plug which is protected
against reverse polarity. The plug
must be grounded in the usual way.
Do not remove the round grounding
connector pin from the plug.
Use only a grounded plug adapter.

Wait for 1 hour after installation before
plugging the appliance into the power
supply. This allows coolant and refriger-
ator oil to settle in accordance with reg-
ulations.

Ensure that the voltage of the main
power supply corresponds with the
connection voltage of the appliance. A
power supply of 110 - 120 V, 60 Hz and
15 Amp (20 Amp for side-by-side instal-
lation) with a NEMA 5-15 molded plug,
which is protected by a main switch or
a fuse, is required to operate the appli-
ance.

The manufacturer recommends operat-
ing the appliance on a separate circuit
to avoid overloading the electrical cir-
cuit.

All relevant legal electrical, fire and
building regulations must be observed
when installing the socket and/or the
appliance.

In certain countries appliances are re-
quired to be connected to the electrical
supply via a wall-mounted ON/OFF
switch.

To avoid the risk of fire, electric shock
or other injuries installation and connec-
tion of the appliance must be carried
out by a suitably qualified electrician in
accordance with all relevant local and
national regulations and standards, in-
cluding fire prevention.

«
...
68
69
70
71
72
...
»

Содержание KFN 13923 DE

































































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 13923 DE

Бренд: Igloo Страницы: 12

Бренд: Avanti Страницы: 19

Бренд: Godrej Appliances Страницы: 12

Бренд: JUNO Страницы: 12

Бренд: Ravanson Страницы: 51

Бренд: Bartscher Страницы: 8

Бренд: Avanti Страницы: 32

Бренд: Jenn-Air Страницы: 32

Бренд: Maytag Страницы: 1

Бренд: Smeg Страницы: 9

Epicure EF36LNDFSS

Бренд: Dacor Страницы: 2

Бренд: Delfield Страницы: 4

Бренд: Ariston Страницы: 40

MSD2274VEM - 21.8 cu. Ft. Refrigerator

Бренд: Maytag Страницы: 2

Бренд: elvita Страницы: 96

Бренд: Blizzard Страницы: 8

Бренд: NABO Страницы: 68

Бренд: Atag Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды