Miele KFN 13923 DE Скачать руководство пользователя

Страница: 39 / 96

Adjusting the interior fittings (refrigerator section)

Adjusting the bottle holder

The bottle holder can be moved left or
right. This way you can be sure that the
bottles will be more secure when the
machine door is opened and closed.

The bottle holder can be removed com-
pletely, for example for cleaning.



To do this, push the front edge of the
bottle holder up and disengage it.

Moving the carbon filter

When you are storing very strong-
smelling food (e.g., cheese):

– Place the holder with the carbon fil-

ters on the adjustable shelf where this
food is being kept.

– Change the carbon filters sooner if

necessary.

– Use additional carbon filters (with

holders) in the appliance (see “Acces-
sories – Optional accessories”).

The holder for the carbon filters sits on
the protective strip at the back of the
adjustable shelf.



Pull the carbon filter holder upward to
remove it from the protective strip.



Refit it on the protective strip of the
adjustable shelf you wish to use it on.

Содержание KFN 13923 DE

































































































Результаты поиска

Содержание KFN 13923 DE

Отзывы:

Похожие инструкции для KFN 13923 DE

Бренды по названию

Популярные бренды

Miele KFN 13923 DE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 13923 DE

Отзывы:

Похожие инструкции для KFN 13923 DE

Бренды по названию

Популярные бренды