background image

Frequently Asked Questions

120

With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department.

This guide may help you to find the reason for the fault, and how to correct it.

To prevent cold from escaping, open the appliance doors as little as possible un-
til the fault has been corrected.

Problem

Possible cause and solution

If you are concerned
that your appliance is
not working properly,
you can perform a 

Self

Test

. Your appliance will

be checked for any
faults or malfunctions.

Any errors identified during the Self Test are shown
on the display.

Perform a Self Test (see “Additional settings”, sec-
tion “Performing a 

Self Test

 

”).

Contact Technical Service and inform them of the
error message(s) on the display.

The appliance is not
getting cold and the in-
terior lighting does not
come on when the ap-
pliance door is opened.

The appliance has not been turned on.

Turn the appliance on. The temperature appears in
the display.

The plug is not properly plugged into the electrical
outlet.

Insert the plug into the outlet.

The fuse has tripped. There could be a fault with the
appliance, the household electrical wiring, or another
appliance.

Contact a technician or the Technical Service de-
partment.

Содержание KF 2981 Vi









































































































































Отзывы: