manualshive.com logo in svg

Miele KF 2801 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele KF 2801 Vi Скачать руководство пользователя страница 87

Selecting additional settings

87

– SuperFrost function

(if previously switched on)

– Ice Maker

(if previously switched on)

You can still select:

– the sensor control for Settings

mode 

 so that 

Sabbath Mode

 can be

switched off

The 

Sabbath Mode

 function will switch it-

self off automatically after approx.
125 hours.

Danger of food poisoning!

Any power failure during Sabbath
Mode will not be shown on the dis-
play. After a power failure, the appli-
ance will restart in Sabbath Mode.
When power is restored, no notifica-
tion of the power failure will appear
on the display.
If there is a power failure during Sab-
bath mode, check the quality of the
food.

Switching on, switching off or
resetting Water Filter Dis-
play 

Depending on the quantity of ice cubes
produced, the Water Filter Display 

will remind you approximately every 6
months that the water filter has to be
replaced (see “Water filter”, section
“Changing the water filter”).

New water filters are available from 
Miele, from your dealer, or

 

via the 

internet.

Содержание KF 2801 Vi













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды