Miele K 35422 iD, Инструкции по эксплуатации и монтажу

Страница: 25 / 88

Using SuperCool and DynaCool
25
DynaCool
When the dynamic cooling function
(DynaCool) is not switched on, the
natural circulation of air will cause
different temperature zones in the
refrigerator as the cold, heavy air sinks
to the lowest section. Make use of the
different temperature zones when
placing food in the refrigerator (see
“Using the refrigerator efficiently”).
However, if you are placing a large
amount of food in the refrigerator (e.g.
for a party), it is a good idea to switch
on DynaCool. This will distribute the
temperature in the appliance to all areas
more evenly so that all the food is
chilled to about the same degree.
The temperature can be set as usual
with the temperature control.
DynaCool should also be switched on
when:
– the ambient temperature in the room
is high, i.e. above 30° C, and
– when humidity levels are high (e.g. in
summer).
Switching on DynaCool
 Touch the DynaCool sensor so that it
is highlighted in yellow.
The fan is now ready for operation:
When the compressor switches on, the
fan will also switch on automatically.
Switching off DynaCool
As the energy consumption is increased
when DynaCool is activated, it should
be switched off under normal
conditions.
 Touch the DynaCool sensor so that it
is no longer highlighted in yellow.
To save energy, the fan switches off
automatically when the door is open.