Miele K 34673 iD, Инструкции по эксплуатации и монтажу

Страница: 64 / 92

Installation
64

Risk of damage!
In environments with high humidity
condensation can build up on the ex-
ternal appliance panels. Condensate
can cause corrosion on external ap-
pliance panels.
For prevention, it is advisable to in-
stall the appliance where there is suf-
ficient ventilation in a dry and/or air
conditioned room.
After installation please make sure
that the appliance door closes prop-
erly, the specified ventilation gaps
are adhered to and that the appli-
ance is installed in accordance with
these installation instructions.
Climate range
The appliance is designed for use within
a certain climate range (ambient tem-
peratures) and should not be used out-
side this range. The climate range of the
appliance is stated on the data plate in-
side the appliance.
Climate range Ambient room
temperature
SN +10 to +32 °C
N +16 to +32 °C
ST +16 to +38 °C
T +16 to +43 °C
Operating in a room which is too cold
will cause the compressor to switch off
for too long, causing the internal tem-
perature in the appliance to rise with the
risk of food deteriorating and going off.
Ventilation

If the ventilation gaps given are
not observed, the compressor will
run more frequently and for longer
periods.
This will result in increased energy
consumption and a higher operating
temperature for the compressor. This
may, in turn, cause damage to the
compressor.
It is essential to observe the ventila-
tion gaps given.
Air at the back of the appliance gets
warm. The appliance housing unit must
therefore be constructed to allow suffi-
cient space for ventilation (see “Build-
ing-in dimensions”).