Miele K 34673 iD, Инструкции по эксплуатации и монтажу

Страница: 39 / 92

Adjusting the interior fittings
39
Adjusting the door shelf /
bottle shelf
Risk of injury!
Only move door shelves / bottle
shelves when they are empty.
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards

Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Adjusting the bottle holder
The bottle holder can be moved left or
right to create more room for drink car-
tons.
The bottle holder can be removed com-
pletely (e.g. for cleaning):
 Push the bottle shelf upwards, then
remove it by pulling it forwards

Pull the bottle holder upwards to re-
move it from the rear edge of the
bottle shelf.
Moving the adjustable
shelves / adjustable shelves
with lighting
The shelves can be adjusted according
to the height of the food.

Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.

Push the shelf in until it clicks into po-
sition.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from be-
ing dislodged by mistake.
Adjustable shelves with lighting
The LED lighting is located in the stain-
less steel trim of the adjustable shelves.
You can illuminate the refrigerator sec-
tion as you wish by moving the shelves.