Installing the appliance
72
Fitting the furniture door
If fitted in a run of units make sure that
the top edge of the furniture door is at
the same height as neighbouring unit
doors.
The furniture door must be fitted
correctly and not under tension.
The next section gives instructions on
how to fit a furniture door that is at
least 16–19 mm thick.
A gap of 8 mm is set ex-works
between the appliance door and the
fixing bracket. Double check this gap
and reset it if necessary.
Push fitting aids
up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see
on
the diagram).
Tip:
Push fitting aids
together with
the furniture front up to the height of the
adjoining unit furniture doors.
Undo nuts
and take fixing bracket
off together with fitting aids
.
