Miele K 2601 V Скачать руководство пользователя

Страница: 81 / 108

Adjusting the interior fittings

Removing or moving the door
shelves

Only move or remove the door
shelves when they are empty.



Hold the shelf on the frame with both
hands and lift it slightly so that it can
be lifted with the catches on both
sides over the guide.



Remove the shelf or place it in the
required position with the catches in
the guides at the same height again.



Make sure that the shelf is straight.

Tip:

For the purposes of loading and

unloading or cleaning, the clip-in
containers in the shelves can be
removed from their holders completely.

Removing or moving the
shelves



Use both hands to grip the shelf from
below and raise it slightly so that it
can be lifted with the catches over
the guide at the back.



Pull the shelf forwards.



Remove the shelf or place it in the
required position, with the catches in
the guide again.



Make sure that the shelf is straight.

Содержание K 2601 V













































































































Результаты поиска

Содержание K 2601 V

Отзывы:

Похожие инструкции для K 2601 V

Бренды по названию

Популярные бренды

Miele K 2601 V, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 2601 V

Отзывы:

Похожие инструкции для K 2601 V

Бренды по названию

Популярные бренды