Before first use
44
Heating up the drawer for the
first time
Remove any protective film.
Remove the non-slip liner from the
drawer.
Clean the non-slip liner with hot water
and liquid dish soap, applied with a
clean sponge cloth or a clean, damp
microfiber cloth.
Dry the non-slip liner with a soft cloth.
Before heating it up, wipe the drawer
inside and out with a damp cloth to
remove any dust or left-over
packaging.
Dry all surfaces with a soft cloth.
Replace the non-slip liner in the
drawer.
Heat the drawer for at least two hours.
Tap the
On/Off button.
Touch the
Menu
sensor button
repeatedly until the
symbol lights
up.
Touch the
Temperature
sensor button
repeatedly until the segment on the
far right-hand side of the temperature
display lights up.
Touch the
Duration
sensor button
repeatedly until
2 h
lights up.
Close the drawer.
The drawer will switch itself off
automatically after two hours.
The drawer is equipped with a contact
switch. This ensures that the heating
element and fan in the appliance only
work when the drawer is closed.
Because the metal components are
protected by a conditioning agent, there
will be a slight odor the first time the
drawer is heated up. The harmless odor
will dissipate after a short time and
does not indicate a faulty connection or
appliance defect.
During this time, make sure that the
kitchen is adequately ventilated.
Содержание HR 1954-3 DF
Страница 134: ......
Страница 136: ...M Nr 11 919 070 00 en US CA HR 1954 3 DF HR 1955 3 DF HR 1956 3 DF ...