Using the oven
43
Changing factory default settings
Default settings are set in the oven
controls at the factory (see “Settings
overview”).
A setting can be changed by altering its
status.
The settings can only be changed
when the mode selector is at
Off
.
Select
OK
.
If necessary, use
or
to move the
triangle
until it appears under
.
Confirm with
OK
.
appears:
If you want to change another setting,
select the appropriate number with
or
.
Confirm with
OK
.
The setting is selected and the current
status appears, e.g.,
.
To change the status:
Set the desired status using
or
.
Confirm with
OK
.
The status is saved and the setting
appears again.
To change additional settings,
proceed in the same way.
If you do not want to change any
further settings, select
.
The settings will remain in the memory
in the event of a power failure.
Содержание HR 1124-3 AG
Страница 80: ...M Nr 11 918 950 02 en US CA HR 1124 3 AG ...