manualshive.com logo in svg

Miele HG07-W, Руководство по эксплуатации, Страница: 27 / 124

Поделиться
Скачать
Miele HG07-W Скачать руководство пользователя страница 27

Before using for the first time

27

Activating AutoDos

The display changes to the settings
screen for AutoDos (see the “Detergent”
chapter, “Automatic dispensing/
AutoDos” section).

Even if you do not wish to use
AutoDos, you must remove the
transport locking device from the
PowerDisk compartment before
running the first programme (see the
“Detergent” chapter, “AutoDos”
section).

You can activate AutoDos. 
If you do not wish to use AutoDos
(automatic dispensing), you can
manually dispense the detergent into
the detergent compartment (see the
“Detergent” chapter, “Manual detergent
dispensing” section).

Select the setting you want and
confirm with 

OK

.

This setting applies to all programmes
and you can change it at any time using
the 

 

AutoDos

 sensor control.

Finally, prompts will appear in the
display.

After confirming these prompts with

OK

, the messages 

 

Refill salt

 and

 

Refill rinse aid

 may appear.

Add salt and rinse aid if necessary
(see “Before using for the first time –
Dishwasher salt” and “Rinse aid”).

Select 

OK

 to confirm the messages.

The programme selected will appear
briefly in the display and the
appropriate sensor control will be
illuminated. 
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds.
Then the display will show the
estimated running time for the
programme selected.

Содержание HG07-W





























































































































Отзывы:

Нет отзывов