manualshive.com logo in svg

Miele HG07-W, Руководство по эксплуатации, Страница: 21 / 124

Поделиться
Скачать
Miele HG07-W Скачать руководство пользователя страница 21

Caring for the environment

21

Disposal of the packing
material

The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.

Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.

Disposal of your old appliance

Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.

Please dispose of it at your local
community waste collection / recycling
centre or contact your Miele dealer for
advice.

Ensure that it presents no danger to
children while being stored for disposal.

Содержание HG07-W





























































































































Отзывы:

Нет отзывов