Settings
38
Safety
Sensor lock
The sensor lock prevents the cooking
programme being switched off by
mistake or settings being changed.
Apart from the
On/Off sensor control,
the activated sensor lock prevents the
sensor controls and fields in the display
from working a few seconds after a
programme has been started.
-
On
The sensor lock is activated. Touch
the
OK
sensor control for at least
6 seconds to deactivate the sensor
lock for a short period of time.
-
Off
The sensor lock is deactivated. All
sensor controls react to touch as
normal.
System lock
The system lock prevents the oven
being switched on by mistake.
The minute minder and the MobileStart
function can still be used when the
system lock is active.
The system lock will remain activated
even after a power failure.
-
On
The system lock has been activated.
Before you can use the oven, touch the
OK
sensor control for at least
6 seconds.
-
Off
The system lock is deactivated. You
can use the oven as normal.
Miele@home
The oven is a Miele@home-compatible
appliance. Your oven is fitted ex-works
with a WiFi communication module
and is suitable for wireless
communication.
There are a number of ways of
connecting your oven to your WiFi
network. We recommend connecting
your oven to your WiFi network with the
help of the Miele@mobile App or via
WPS.
-
Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
-
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
-
Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name and
IP address.
-
Set up again
This setting is only visible if a WiFi
network has already been set up.
Reset the network settings and
immediately set up a new network
connection.
-
Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
WiFi connection will be reset to the
factory default. You must set up a new
WiFi connection to be able to use