Cleaning and care
108
Carrying out the descaling process
As soon as the intake process
has started the descaling process
can no longer be cancelled.
Select the Moisture plus
function.
Use the rotary selector
to
select
.
Confirm with
OK
.
If Moisture plus
was already
locked, the descaling process can be
started immediately by touching
OK
.
The prompt for the
drawing in process
(
) will appear and the triangle
will
flash under
Confirm with
OK
.
The intake process will begin. You can
hear the pump while this is happening.
The amount of solution specified can be
more than the amount which is actually
taken in. Some of the solution may
therefore be left in the container at the
end of descaling.
The
activation phase
(
) will begin.
You can follow the duration as it counts
down.
h
Leave the container with the tube
connected to the water intake pipe in
the oven. Top the container up with
approx. 300 ml of water, as the
system will need to draw in some
more liquid during the activation
phase.
The system will take in more liquid at
approximately 5 minute intervals. You
will hear the noise of the pump for a
moment or so.
The descaling step can be displayed:
Select
.
Use the rotary selector
to move
the triangle
until it lights up
under
.
To display time remaining, use the
rotary selector
to move the
triangle
until it lights up
under
.
At the end of the activation phase a
buzzer will sound, if the buzzer is
switched on (see "Settings -
").
Содержание H 6160 BP
