Miele H 4312 B, Инструкции по эксплуатации и монтажу

Страница: 42 / 56

Dismantling the oven door
The oven door has seals on all sides to
prevent vapours from getting in.
If condensate has worked its way in
between the glass panes, the door can
be dismantled in order to clean in
between the panes.
Clean the glass in the same way as
you would clean the appliance front.
Do not use abrasive cleaners, hard
sponges, brushes or sharp metal
tools to clean glass as these can
scratch the surface. Scratches can
cause the glass to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a towel).
You need to remove the door before
it can be dismantled.
^
Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
^
Unscrew the Torx screws and
remove the guides along with the trim
and seal.
^
You can now remove the inner and
middle panels.
Cleaning and care
42