Clock/timer
37
Setting the time
The time of day is set in segments:
– For the time of day and cooking dura-
tions, first the hours, then the
minutes.
– For a minute minder duration, first the
minutes, then the seconds.
Confirm with
OK
.
The respective functions appear de-
pending on the position of the function
selector (
,
,
or
).
Highlight the function you want using
the
or
sensor control.
The appropriate symbol will flash for
approx. 15 seconds.
While the symbol is flashing, confirm
with
OK
.
The function is accessed and the left-
hand numeric block will flash.
You can only set the time while the nu-
meric block is flashing. If the time has
elapsed and the numeric block is no
longer flashing, you have to access
the function again.
Use the
or
sensor control to set
the value you want.
Confirm with
OK
.
The right-hand numeric block will flash.
Use the
or
sensor control to set
the value you want.
Confirm with
OK
.
The time has now been saved.
Time display
The symbols
and
or
will show
if you have set times.
If you are using the minute minder
,
cooking duration
and end of cooking
duration
functions at the same time,
the last time that you set will be shown.
If you have set a cooking duration, the
time of day will not be displayed.
At the end of the duration
When a duration has elapsed, the ap-
propriate symbol will flash and a buzzer
will sound if the buzzer is switched on
(see “Clock/timer – Changing settings”).
Confirm with
OK
.
The buzzer will stop and the symbols in
the display will go out.
Содержание H 2265-1 BP
Страница 79: ...Installation I N S T A L L A T I O N 79 Side view of H 22xx ...
Страница 80: ...Installation I N S T A L L A T I O N 80 Side view H 28xx H 25xx H 27xx A H 25xx H 27xx 43 mm H 28xx 47 mm ...
Страница 100: ...M Nr 11 190 060 02 en GB H 2265 1 BP H 2267 1 BP H 2760 BP H 2860 BP H 2850 BP ...
