Electrical connection
@ä
Electrical connection of the
appliance should be undertaken by
a qualified electrician in strict ac-
cordance with national and local
safety regulations.
Caution:
In order to avoid a hazard this ap-
pliance must be installed according
to these instructions for installation.
Fusing arrangements must be accord-
ing to national and local standards.
Connection should be made via a suit-
able isolator switch which complies
with national and local regulations. It
should be easily accessible for servic-
ing work.
The data plate, located on the right-
hand side below the control panel,
gives the necessary
connection
rating
, which must be according to
national and local standards.
When contacting the Service Depart-
ment, please quote the voltage, model
and serial numbers given on the data
plate.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test certificates awarded . . . . . . . . . . .
. . . . . . . . Electrical Safety, C-Tick Mark
Electrically suppressed acc. to . . . . . .
. . . . . . . . . . . . . . . . . . . . . AS/NZS 1044
@
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The fuse rating is 20 A.
ä
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 20 A.
64
Содержание H 217 B2
Страница 4: ...Description of the appliance H 217 B2 4 ...
Страница 66: ...66 ...
Страница 67: ...67 ...