manualshive.com logo in svg

Miele G7106, Руководство по эксплуатации

Поделиться
Скачать
Miele G7106 Скачать руководство пользователя страница 76

Frequently Asked Questions

76

Water intake fault

Problem

Possible cause and solution

One of the following
messages appears in
the display:

 

Open water supply

The water supply is turned off.

Turn on the water supply fully.

 

Intake

Before remedying the fault:

Switch the dishwasher off.

There is a problem with the water intake.

Turn on the water supply fully and start the
program again.

Clean the filter in the water intake (see “Cleaning
the filter in the water intake” under “Cleaning and
care”).

The water connection pressure is lower than
50 kPa. 
Seek professional advice.

The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under
“Installation”).

 

Fault F18

A technical fault has occurred.

Switch the dishwasher off.

Turn off the water supply.

Contact Miele Service.

Содержание G7106

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды