Frequently Asked Questions
92
Problem
Possible cause and solution
White residue is visible
on dishes and cutlery,
clouding occurs on
glassware; this film can
be wiped off.
The rinse aid dosage is too low.
Increase the dosage (see "Settings menu, Rinse
aid").
The salt reservoir is empty.
Fill the salt reservoir (see "Before using for the first
time, Dishwasher salt").
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
An unsuitable Tab detergent has been used.
Change your detergent.
The softener assembly is programmed too low for the
water hardness level.
Program the softener assembly to a higher water
hardness level (see "Settings menu, Water hard-
ness").
There are rust stains on
the cutlery.
The affected items are not corrosion resistant.
There is no remedy.
Purchase cutlery which is dishwasher-safe.
A program was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
Always run the
QuickIntenseWash
program with
the
Short
programming option selected and with-
out any dishes in the dishwasher after adding
dishwasher salt.
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
Содержание G6880
Страница 108: ...M Nr 10 546 910 00 en US G 6880 G6885 ...