Problem solving guide
104
Fault messages
Problem
Possible cause and remedy
The optical in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
One of the following
faults appears in the
display:
Before rectifying the problem, you must:
Switch the dishwasher off.
Fault F: Technical fault.
Switch the appliance off and
back on again. Read the
operating instruction manual
for further details.
There may be a technical fault.
Switch the dishwasher back on after a few
seconds.
Select the required programme.
Close the door.
If the fault message appears again, there is a
technical fault.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Waterproof fault: Switch
off the appliance, turn off the
tap and call Miele Service.
The Waterproof system has reacted.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Fault F78: A technical
fault has occurred. Switch
off the appliance, turn off the
tap and call Miele Service.
Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Select the required programme.
Close the door.
If the fault message appears again, there is a
technical fault.
Switch the dishwasher off.
Turn off the tap.
Call Miele.
Содержание G 7969
