Initial commissioning
30
Refilling the salt
Fill the salt reservoir with reactivation
salt when
Refill salt and start the
“QuickIntenseWash” program with the
“Express” option without a load
appears
in the display.
Confirm with
OK
.
The salt refill indicator will go out.
Danger of corrosion due to saline
solution.
Salt solution that runs out can cause
corrosion in the wash cabinet and to
the wash items.
Each time you remove the salt
reservoir cap, you must run the
65°C
QuickIntenseWash
program
with the
Express
program option
selected without wash items in the
dishwasher. This will dissolve and
remove any traces of salt from the
wash cabinet.
After the salt reservoir has been filled,
the refill indicator may still appear in the
display if the salt concentration has not
yet reached the correct level. In this
case, still confirm the message again
with
OK
.
The salt refill indicator will be turned off
if you have programmed the dishwasher
for a water hardness below 5 gr/gal
(5 °dH).
Содержание G 7966
Страница 5: ...Contents 5 Electrical connection 118 Sound emission testing 120 ...
Страница 122: ......
Страница 124: ...M Nr 11 859 220 00 en CA G 7966 ...