Settings
106
AutoDos (AutoDos)
If you later wish to change the fill level
or dispensing amount of the PowerDisk,
you can adjust the pre-set values ac-
cording to the information on the pack-
aging.
These settings are important in order for
the
PowerDisk almost empty
message to
be displayed correctly. These settings
have no influence on the amount of de-
tergent dispensed in each rinse pro-
gram.
Setting the PowerDisk fill level
The PowerDisks currently available con-
tain 400 g of detergent.
Select the
PowerDisk fill level
menu op-
tion and confirm with
OK
.
Enter the PowerDisk fill quantity and
confirm with
OK
.
Setting the Dosage amount
The PowerDisks currently available dis-
pense approximately 7 g of detergent
per rotation.
Select the
Dosage amount
menu op-
tion and confirm with
OK
.
Select the dispensing quantity of the
PowerDisk and confirm with
OK
.
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If spots appear on dishes and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
dishes and glassware:
- Decrease the rinse aid dosage.
Содержание G 7961
Страница 2: ......
Страница 6: ...Contents 6 Factory default 116 Sound emission testing 117 ...
Страница 120: ...M Nr 11 501 470 00 en US G 7961 G 7966 ...