Miele G 7314 Скачать руководство пользователя страница 73

Страница: 73 / 124

Programme options

Selecting programme options

You can use programme options to
adjust the programmes.

To do this, you can select or deselect
the programme options before starting
the programme.



Switch the dishwasher on using the



sensor.

The

Start

sensor flashes.



Select a programme as required.



Touch the sensor for the programme
option you want.

The appropriate sensor will light up
when the programme option is
selected.

If the programme option is not
compatible with the selected
programme, a message to this effect
will appear in the display.



In this event, confirm the message
with



Press the

Start

sensor to start the

programme.

The selected programme option will
remain active for that particular
programme until the selection is
changed.

IntenseZone



The



IntenseZone

programme option

increases cleaning performance in the
lower basket.

Energy consumption increases due to
the extended wash duration in the lower
basket and increased temperature.

Express



The



Express

programme option

reduces the programme duration.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme
duration is shortened varies according
to the selected programme.

Selecting the



Express

programme

option may take precedence over other
selected options.

When used in combination with the

QuickPowerWash

programme, the



Express

programme option results

in a rinse designed solely for the
purpose of flushing out the wash
cabinet to remove salt solution that
leaked out after refilling the salt
reservoir.

Содержание G 7314





























































































































Результаты поиска

Содержание G 7314

Отзывы:

Похожие инструкции для G 7314

Бренды по названию

Популярные бренды

Miele G 7314, Руководство по эксплуатации

Результаты поиска

Содержание G 7314

Отзывы:

Похожие инструкции для G 7314

Бренды по названию

Популярные бренды