Miele G 7156 Скачать руководство пользователя

Страница: 21 / 96

Initial commissioning

Basic settings

Switching on the dishwasher



Open the door.



Switch the dishwasher on with the



button.

The welcome screen will appear when
the dishwasher is turned on.

For further information about the
display functionality, see “Display
functions” under “Guide to the
appliance”.

Setting the language

The display will change automatically to
the screen for setting the language.



Select the language you want as well
as the country, if applicable, using
the



buttons and confirm with

For further information on setting the
language, see “Language” under
“Settings”.

A check



will appear next to the

language that has been set.

Setting the water hardness

The display changes to the screen for
setting the water hardness.

- You should program the dishwasher

to the correct water hardness for your
area.

- Your local water authority will be able

to advise you of the water hardness
level in your area.

- Where the water hardness fluctuates,

e.g., between 10–16 gr/gal (10–
15 °dH), always program the
dishwasher to the higher value (16 gr/
gal (15 °dH) in this example).

It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.

Enter the water hardness below:

____________ gr/gal (°dH)

The dishwasher is programmed at the
factory for a water hardness level 1 gr/
gal (1 °dH).



Set the water hardness level in your
area and confirm with

See “Water hardness” under
“Settings” for more information.

Содержание G 7156

































































































Результаты поиска

Содержание G 7156

Отзывы:

Похожие инструкции для G 7156

Бренды по названию

Популярные бренды

Miele G 7156, Руководство по эксплуатации

Результаты поиска

Содержание G 7156

Отзывы:

Похожие инструкции для G 7156

Бренды по названию

Популярные бренды