Miele G 6980 страница 68 Скачать руководство пользователя

Страница: 68 / 100

Cleaning and care

Check and clean your dishwasher

regularly. This will help avoid prob‐

lems and faults.



All surfaces are susceptible to

scratching.
Contact with unsuitable cleaning

agents can alter or discolor all surfa‐

ces.

Cleaning the wash cabinet

Generally, the wash cabinet is self

cleaning if the correct amount of deter‐

gent is used.
If, however, there are lime scale or

grease deposits in the cabinet, these

can be removed with a special dish‐

washer cleaner (see "Optional accesso‐

ries"). Follow the instructions on the

packaging.
If you mainly use low temperature pro‐

grams (< 120°F/50 °C), there is a risk of

bacteria and unpleasant odors building

up in the wash cabinet. To prevent this

happening the dishwasher will automat‐

ically increase the temperature in the fi‐

nal rinse of the selected program after

several programs using low tempera‐

tures have been run.



Clean the filters in the wash cabinet

regularly.

Cleaning the door and the door

seal

Bacteria could build up on the door

seal and the sides of the dishwasher

door as these surfaces are outside the

wash cabinet and are not accessed and

cleaned by the spray arm jets.



Wipe the door seals regularly with a

damp cloth to remove food deposits.



Wipe off any food or drink residues

which may have dripped onto the

sides of the dishwasher door before

closing it.

Cleaning the control panel



The control panel should

only

wiped with a damp cloth.

Cleaning the indicator reflector

panel

The indicator reflector panel for the Op‐

tical Interface / TimeControl function

(depending on model) is situated in the

cover plate underneath the counter.



The indicator reflector panel should

only be wiped with a damp cloth or a

suitable cleaning agent designed for

use on plastic.

Содержание G 6980





































































































Результаты поиска

Содержание G 6980

Отзывы:

Похожие инструкции для G 6980

Бренды по названию

Популярные бренды

Miele G 6980, Руководство по эксплуатации

Результаты поиска

Содержание G 6980

Отзывы:

Похожие инструкции для G 6980

Бренды по названию

Популярные бренды