Operation
49
Interrupting a program
The program will be interrupted as soon
as you open the door.
After four seconds, the message
Contin-
ue with OK
will appear in the display.
Confirm with
OK
and close the door
within four seconds.
The program will continue from the
point at which it was interrupted.
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely nec‐
essary and exercise extreme caution
when doing so. Before closing the
door again, leave it ajar for approx.
20 seconds. This will enable the tem‐
perature in the wash cabinet to set‐
tle. After that, confirm the message
with the
OK
and close the door with‐
in four seconds.
Changing a program
If the detergent dispenser flap has
already opened, do not change the
program.
If a program has already started and
you wish to change it, proceed as fol‐
lows:
Open the door.
Press the
sensor button.
Confirm the message
Cancel program?
with
Yes
.
The program will be canceled.
Select the Main Menu option.
The display will revert to the main
menu.
Select the desired program.
Start the program by closing the door
within four seconds.
The TimeControl function comes on to
show that a program has been started.
Содержание G 6980
Страница 88: ...88 ...
Страница 97: ......
Страница 98: ......
Страница 100: ...M Nr 10 014 210 04 en US G 6980 G 6985 ...