Programme options
59
Factory defaults
If you have altered any settings, you
can reset them back to the factory de-
fault settings.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
button pressed in for at
least 4 seconds until the
indicator
light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the
programme selection
button 19 times.
The top left programme indicator light
will emit 1 long flash and 9 short flashes
at intervals.
The flashing sequence in the display in-
dicates whether the setting deviates
from the factory default:
-
: All values are factory default set-
tings.
-
: At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the
button.
The setting is now saved.
Switch the dishwasher off with the
button.
Содержание G 5050
