Miele G 4948 Скачать руководство пользователя страница 56

Страница: 56 / 76

Frequently Asked Questions

General problems

Problem

Possible cause and solution

The indicator lights and
time display are dark.

The dishwasher has switched off automatically to
save energy.



Turn the dishwasher on again with the



button.

Detergent residue is left
in the dispenser at the
end of a program.

The dispenser was still damp when detergent was
added.



Make sure the dispenser is dry before adding de-
tergent.

The dispenser cover
cannot be closed.

Detergent residue is blocking the latch.



Remove the detergent residue.

The inside of the door
and/or the interior walls
are wet after a program
has finished.

This is caused by the drying system and does not in-
dicate a fault. The moisture will dissipate after a
while.

Water remains in the
wash cabinet at the end
of a program.

Before fixing the fault:



Turn the dishwasher off with the



button.

The filter system in the wash cabinet is clogged.



Clean the filter system (see "Cleaning and care -
Filter system").

The drain pump or non-return valve is blocked.



Clean the drain pump or the non-return valve (see
"Frequently asked questions").

The drain hose is kinked.



Remove the kink.

Содержание G 4948













































































Результаты поиска

Содержание G 4948

Отзывы:

Похожие инструкции для G 4948

Бренды по названию

Популярные бренды

Miele G 4948, Руководство по эксплуатации

Результаты поиска

Содержание G 4948

Отзывы:

Похожие инструкции для G 4948

Бренды по названию

Популярные бренды