Miele G 4948 Скачать руководство пользователя страница 45

Страница: 45 / 76

Options

Factory default settings

If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:



Turn the dishwasher off with the



button, if it is turned on.



Press the

Start

button and,

simulta-

neously

, switch the dishwasher on

using the



button.

Keep the

Start

button pressed for at

least four seconds until the

Start

indi-

cator light comes on.

If this does not happen, start the proce-
dure from the beginning again.



Press the



button 19 times.

The



indicator light will flash once at a

long interval and then 9 times at short
intervals.

The flashing sequence in the display in-
dicates whether a setting has been
changed from its factory default.

–

 

: All settings are set to factory de-

fault settings

–

 

: At least one setting has been

changed



To reset the dishwasher to the factory
default settings, press the

Start

but-

ton.

The setting is now stored in memory.



Turn the dishwasher off with the



button.

Содержание G 4948













































































Результаты поиска

Содержание G 4948

Отзывы:

Похожие инструкции для G 4948

Бренды по названию

Популярные бренды

Miele G 4948, Руководство по эксплуатации

Результаты поиска

Содержание G 4948

Отзывы:

Похожие инструкции для G 4948

Бренды по названию

Популярные бренды