Programme options
63
Factory default settings
If you have altered any settings from
the factory default, you can reset them
back to the factory default settings as
follows:
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and,
whilst
holding it in
, switch the dishwasher
on using the
button.
Keep the
Start
button pressed in for
at least 4 seconds until the
Start
indi‐
cator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
button 19 times.
The
indicator light will do 1 long
flash and 9 short flashes at intervals.
The flashing sequence in the display in‐
dicates whether a setting has been
changed from its factory default.
–
: All settings are set to factory de‐
fault settings.
–
: At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the
Start
but‐
ton.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Содержание G 4920
